West Yarmouth · Cape Cod
Tile of America provides kitchen cabinet refacing in West Yarmouth, MA, keeping your existing cabinet boxes and replacing what you see: new door and drawer fronts, veneer or laminate skins on face frames and end panels, and new hardware, typically finished in days at $150 to $300 per linear foot.
Keeps your layout, plumbing, and wiring in place while delivering a kitchen that looks newly installed, typically in two to five days.
Kitchen cabinet refacing in West Yarmouth covers more than swapping doors. The condition of the cabinet boxes underneath determines whether the new veneer skin holds for years or lifts within months.
Most West Yarmouth kitchens were built between 1970 and 1999. The boxes in those homes are often structurally sound even when the doors look dated, and that is exactly the situation refacing is designed for.
Cape Cod humidity, seasonal moisture movement, and older plumbing connections can soften a cabinet floor without any visible sign from the outside. Tile of America inspects every box on site before preparing an estimate.
Services include new door and drawer fronts, veneer and laminate skinning of face frames and end panels, new hardware and hinges, and full door and drawer alignment throughout the kitchen.
Complete Refacing Services
Each job starts with an in-home assessment of your cabinet boxes before a single door is ordered or a single skin is cut.
Door and Drawer Fronts
New door and drawer fronts go on in place of the originals. We hang them level with consistent reveals across every opening and adjust hinges so each door closes squarely. This is the most visible part of any refacing job.
Face Frame Skinning
A matching veneer or laminate skin covers the face frames and exposed end panels of your existing boxes. We scuff and clean every surface first so the adhesive bonds flat. Edges are trimmed flush and sealed against moisture before anything else goes on.
Hardware and Hinges
New hardware and hinges go on with every refacing job. Soft-close hinges from Blum or Grass and undermount drawer glides are standard options. Hardware style and finish are selected during the design consultation before anything is ordered.
Alignment and Adjustment
Every door and drawer gets adjusted for level, plumb, and consistent reveal before we call a job done. In older Cape Cod homes the walls and floors move, and the cabinets move with them. We correct the alignment at the hinge and the glide, not just at the pull.
Box Assessment
Refacing only works on sound boxes. We check every carcass for water damage, sagging shelves, and broken face frames before quoting. A box that has failed needs replacement, not a skin. We say so clearly before any work begins.
Interior Upgrades
Refacing can be combined with rollout shelf installation and soft-close drawer glide conversion inside your existing boxes. The exterior gets updated at the same time the interior gets more functional, without touching the countertop, plumbing, or wiring.
The right material depends on your budget, how the kitchen is used, and the finish you want. Every option below is available for West Yarmouth kitchens.
| Material | Best For | What to Know | Pricing |
|---|---|---|---|
| Rigid Thermofoil and Laminate | Budget-conscious updates that still look clean and current. | A vinyl or laminate skin over an MDF core. Wipes down easily, holds color well, and costs two to three times less than solid wood. Not suitable for high-heat areas directly beside a range without heat deflectors. | Request a Quote |
| Wood Veneer | Homeowners who want a natural wood look without full cabinet replacement. | Available in oak, maple, cherry, birch, and walnut, matched to solid wood door fronts. Each sheet has natural grain variation. Can be stained or finished to match existing trim in the home. | Request a Quote |
| Paint-Grade MDF | Kitchens where a painted finish is the goal. | Smooth, stable surface that takes paint evenly without grain telegraphing through. Used for shaker and slab door profiles. Requires quality primer and paint but delivers a crisp factory-look result. | Request a Quote |
| Soft-Close Hardware Upgrades | Any refacing job where the existing hinges and glides are worn or loud. | Blum or Grass soft-close hinges and undermount drawer glides are installed per manufacturer spec. Selected during the design consultation before anything is ordered. | Request a Quote |
Surface prep is where most refacing jobs succeed or fail, and most of that work disappears under the veneer once the skin goes on.
Tile of America performs kitchen cabinet refacing from West Yarmouth across the full arm of Cape Cod and selected communities toward Plymouth. Call (774) 368-6838 to confirm scheduling for your address.
We measure every run of cabinetry, check each box for water damage, sagging shelves, or broken face frames, and confirm the carcasses are sound before anything is ordered.
You select door style, veneer or laminate material, finish, and hardware. Doors, drawer fronts, and skins are custom ordered after selections are confirmed. The estimate is free.
Existing doors, drawer fronts, and hardware come off first. Face frames and end panels are sanded, scuffed, and cleaned before veneer or laminate is applied with full contact-adhesive coverage and edges trimmed flush.
Every door and drawer front is hung level with consistent reveals. Seams and edges are sealed against moisture. We walk through the finished kitchen with you and address any punch-list items before we leave.
Refacing from Tile of America covers new door and drawer fronts, a matching veneer or laminate skin on your face frames and exposed end panels, new hardware and hinges, and full alignment of every door and drawer. It does not cover new boxes, layout changes, or countertop and backsplash work. The line that matters most is the box: refacing renews surfaces, it does not rebuild a failed carcass.
Clear answers about cabinet refacing costs, materials, timelines, box assessment, permit requirements, and service coverage throughout Cape Cod.
Refacing is the right call when the cabinet boxes are structurally sound, meaning no water damage, sagging shelves, or broken face frames. We assess every box before quoting. If the carcasses are solid, refacing delivers a newly finished kitchen while keeping the existing layout, plumbing, and electrical in place. Replacement is recommended only when the boxes themselves have failed.
A refacing job covers new door and drawer fronts, veneer or laminate skinning of face frames and exposed end panels, new hardware and hinges, and full alignment adjustment of every door and drawer. It does not include cabinet box replacement, layout changes, countertop or backsplash work, plumbing or electrical relocation, or repair of structurally failed boxes, which require replacement rather than refacing.
Budget tiers use rigid thermofoil or laminate skins. Mid and higher tiers use wood veneer in oak, maple, cherry, birch, or walnut matched to solid wood door fronts. Paint-grade MDF doors are available for painted finishes. Hardware options include Blum or Grass soft-close hinges and undermount drawer glides. Door style, finish, and hardware are selected during the design consultation before anything is ordered.
Kitchen cabinet refacing in West Yarmouth typically runs $4,000 to $12,000 per kitchen, or roughly $150 to $300 per linear foot installed. The main drivers are linear footage, door material, door style complexity, whether veneer covers only doors or also boxes and end panels, hardware grade, and existing box condition. Contact Tile of America for a free estimate.
A small kitchen of 10 to 15 linear feet takes two to three days. An average kitchen of 15 to 25 linear feet takes three to five days. Larger kitchens with full end-panel veneering and custom hardware can run up to a week. Custom-order lead time for doors, drawer fronts, and skins falls before the installation window and is confirmed at the design consultation.
Boxes with water damage, sagging shelves, or broken face frames cannot be refaced. We identify structural problems during the in-home measure and assessment, the first step of every job. Damaged boxes require replacement rather than refacing, and we say so clearly before any work is quoted. In Cape Cod's high-humidity coastal environment, proceeding over a compromised box is not a repair that holds.
Clear the contents of all upper and lower cabinets and remove items from countertops near the work area. We remove existing doors, drawer fronts, and hardware, then sand and clean face frames and end panels before veneer or laminate adhesion. Having the surfaces accessible from the start keeps the schedule on track and protects your belongings from dust and adhesive.
The Yarmouth Building Department requires a permit when a project involves construction, reconstruction, or alteration of a structure under the State Building Code. Cosmetic refacing with no structural changes, no plumbing or electrical relocation, and no demolition typically falls outside that threshold, but the specific determination rests with the Building Commissioner. We clarify permit requirements during the in-home assessment before work begins.
If you are weighing refacing against replacement, sorting out door styles, or just trying to get a real number for your kitchen, that is the right time to reach out. Tile of America reviews your cabinet boxes in person and provides a free estimate based on what the job actually requires.
